Diagnostic trace functions

Classes

struct  OSRTPrintStream

Defines

#define RTDIAG1(pctxt, msg)
#define RTDIAG2(pctxt, msg, a)
#define RTDIAG3(pctxt, msg, a, b)
#define RTDIAG4(pctxt, msg, a, b, c)
#define RTDIAG5(pctxt, msg, a, b, c, d)
#define RTDIAGU(pctxt, ucstr)
#define RTHEXDUMP(pctxt, buffer, numocts)
#define RTDIAGCHARS(pctxt, buf, nchars)
#define RTDIAGSTRM2(pctxt, msg)
#define RTDIAGSTRM3(pctxt, msg, a)
#define RTDIAGSTRM4(pctxt, msg, a, b)
#define RTDIAGSTRM5(pctxt, msg, a, b, c)
#define RTHEXDUMPSTRM(pctxt, buffer, numocts)
#define RTDIAGSCHARS(pctxt, buf, nchars)

Typedefs

typedef void(* rtxPrintCallback )(void *pPrntStrmInfo, const char *fmtspec, va_list arglist)
typedef struct OSRTPrintStream OSRTPrintStream

Enumerations

enum  OSRTDiagTraceLevel { OSRTDiagError, OSRTDiagWarning, OSRTDiagInfo, OSRTDiagDebug }

Functions

int rtxSetPrintStream (OSCTXT *pctxt, rtxPrintCallback myCallback, void *pStrmInfo)
int rtxSetGlobalPrintStream (rtxPrintCallback myCallback, void *pStrmInfo)
int rtxPrintToStream (OSCTXT *pctxt, const char *fmtspec,...)
int rtxDiagToStream (OSCTXT *pctxt, const char *fmtspec, va_list arglist)
int rtxPrintStreamRelease (OSCTXT *pctxt)
void rtxPrintStreamToStdoutCB (void *pPrntStrmInfo, const char *fmtspec, va_list arglist)
void rtxPrintStreamToFileCB (void *pPrntStrmInfo, const char *fmtspec, va_list arglist)
OSBOOL rtxDiagEnabled (OSCTXT *pctxt)
OSBOOL rtxSetDiag (OSCTXT *pctxt, OSBOOL value)
OSBOOL rtxSetGlobalDiag (OSBOOL value)
void rtxDiagPrint (OSCTXT *pctxt, const char *fmtspec,...)
void rtxDiagStream (OSCTXT *pctxt, const char *fmtspec,...)
void rtxDiagHexDump (OSCTXT *pctxt, const OSOCTET *data, size_t numocts)
void rtxDiagStreamHexDump (OSCTXT *pctxt, const OSOCTET *data, size_t numocts)
void rtxDiagPrintChars (OSCTXT *pctxt, const char *data, size_t nchars)
void rtxDiagStreamPrintChars (OSCTXT *pctxt, const char *data, size_t nchars)
void rtxDiagSetTraceLevel (OSCTXT *pctxt, OSRTDiagTraceLevel level)
OSBOOL rtxDiagTraceLevelEnabled (OSCTXT *pctxt, OSRTDiagTraceLevel level)

Variables

OSRTPrintStream g_PrintStream

Detailed Description

These functions add diagnostic tracing to the generated code to assist in finding where a problem might occur. Calls to these macros and functions are added when the -trace command-line argument is used. The diagnostic message can be turned on and off at both C compile and run-time. To C compile the diagnostics in, the _TRACE macro must be defined (-D_TRACE). To turn the diagnostics on at run-time, the rtxSetDiag function must be invoked with the value argument set to TRUE.


Typedef Documentation

Structure to hold information about a global PrintStream.

typedef void(* rtxPrintCallback)(void *pPrntStrmInfo, const char *fmtspec, va_list arglist)

Callback function definition for print stream.


Function Documentation

OSBOOL rtxDiagEnabled ( OSCTXT pctxt  ) 

This function is used to determine if diagnostic tracing is currently enabled for the specified context. It returns true if enabled, false otherwise.

Parameters:
pctxt Pointer to context structure.
Returns:
Boolean result.
void rtxDiagHexDump ( OSCTXT pctxt,
const OSOCTET *  data,
size_t  numocts 
)

This function is used to print a diagnostics hex dump of a section of memory.

Parameters:
pctxt Pointer to context structure.
data Start address of memory to dump.
numocts Number of bytes to dump.
void rtxDiagPrint ( OSCTXT pctxt,
const char *  fmtspec,
  ... 
)

This function is used to print a diagnostics message to stdout. Its parameter specification is similar to that of the C runtime printf method. The fmtspec argument may contain % style modifiers into which variable arguments are substituted. This function is called in the generated code via the RTDIAG macros to allow diagnostic trace call to easily be compiled out of the object code.

Parameters:
pctxt Pointer to context structure.
fmtspec A printf-like format specification string describing the message to be printed (for example, "string %s, ivalue %d\n"). A special character sequence (~L) may be used at the beginning of the string to select a trace level (L would be replaced with E for Error, W for warning, I for info, or D for debug).
... Variable list of parameters to be substituted into the format string.
void rtxDiagPrintChars ( OSCTXT pctxt,
const char *  data,
size_t  nchars 
)

This function is used to print a given number of characters to standard output. The buffer containing the characters does not need to be null-terminated.

Parameters:
pctxt Pointer to context structure.
data Start address of character string.
nchars Number of characters to dump (this assumes 1-byte chars).
void rtxDiagSetTraceLevel ( OSCTXT pctxt,
OSRTDiagTraceLevel  level 
)

This function is used to set the maximum trace level for diagnostic trace messages. Values are ERROR, WARNING, INFO, or DEBUG. The special string start sequence (~L) described in rtxDiagPrint function documentation is used to set a message level to be compared with the trace level.

Parameters:
pctxt Pointer to context structure.
level Trace level to be set.
void rtxDiagStream ( OSCTXT pctxt,
const char *  fmtspec,
  ... 
)

This function conditionally outputs diagnostic trace messages to an output stream defined within the context. A code generator embeds calls to this function into the generated source code when the -trace option is specified on the command line (note: it may embed the macro version of these calls - RTDIAGSTREAMx - so that these calls can be compiled out of the final code.

See also:
rtxDiagPrint
void rtxDiagStreamHexDump ( OSCTXT pctxt,
const OSOCTET *  data,
size_t  numocts 
)

This function is used to print a diagnostics hex dump of a section of memory to a print stream.

Parameters:
pctxt Pointer to context structure.
data Start address of memory to dump.
numocts Number of bytes to dump.
void rtxDiagStreamPrintChars ( OSCTXT pctxt,
const char *  data,
size_t  nchars 
)

This function is used to print a given number of characters to a print stream. The buffer containing the characters does not need to be null-terminated.

Parameters:
pctxt Pointer to context structure.
data Start address of character string.
nchars Number of characters to dump (this assumes 1-byte chars).
int rtxDiagToStream ( OSCTXT pctxt,
const char *  fmtspec,
va_list  arglist 
)

Diagnostics print-to-stream function. This is the same as the rtxPrintToStream function except that it checks if diagnostic tracing is enabled before invoking the callback function.

Parameters:
pctxt Pointer to context to be used.
fmtspec A printf-like format specification string describing the message to be printed (for example, "string %s, ivalue %d\n").
arglist A variable list of arguments passed as va_list
Returns:
Completion status, 0 on success, negative value on failure
OSBOOL rtxDiagTraceLevelEnabled ( OSCTXT pctxt,
OSRTDiagTraceLevel  level 
)

This function tests if a given trace level is enabled.

Parameters:
pctxt Pointer to context structure.
level Trace level to check.
Returns:
True if enabled.
int rtxPrintStreamRelease ( OSCTXT pctxt  ) 

This function releases the memory held by PrintStream in the context

Parameters:
pctxt Pointer to a context for which the memory has to be released.
Returns:
Completion status, 0 on success, negative value on failure
void rtxPrintStreamToFileCB ( void *  pPrntStrmInfo,
const char *  fmtspec,
va_list  arglist 
)

Standard callback function for use with print-to-stream for writing to a file.

Parameters:
pPrntStrmInfo User-defined information for use by the callback function. This is supplied by the user at the time the callback is registered. This parameter should be set to the file pointer (FILE*) to which data is to be written.
fmtspec Format specification of the data to be printed. This is supplied by the print-to-stream utility.
arglist Variable argument list. This is supplied by the print-to-stream utility.
void rtxPrintStreamToStdoutCB ( void *  pPrntStrmInfo,
const char *  fmtspec,
va_list  arglist 
)

Standard callback function for use with print-to-stream for writing to stdout.

Parameters:
pPrntStrmInfo User-defined information for use by the callback function. This is supplied by the user at the time the callback is registered. In this case, no user-defined information is required, so the argument can be set to NULL when the callback is registered.
fmtspec Format specification of the data to be printed. This is supplied by the print-to-stream utility.
arglist Variable argument list. This is supplied by the print-to-stream utility.
int rtxPrintToStream ( OSCTXT pctxt,
const char *  fmtspec,
  ... 
)

Print-to-stream function which in turn calls the user registered callback function of the context for printing. If no callback function is registered it prints to standard output by default.

Parameters:
pctxt Pointer to context to be used.
fmtspec A printf-like format specification string describing the message to be printed (for example, "string %s, ivalue %d\n").
... A variable list of arguments.
Returns:
Completion status, 0 on success, negative value on failure
OSBOOL rtxSetDiag ( OSCTXT pctxt,
OSBOOL  value 
)

This function is used to turn diagnostic tracing on or off at run-time on a per-context basis. Code generated using ASN1C or XBinder or a similar code generator must use the -trace command line option to enable diagnostic messages. The generated code must then be C compiled with _TRACE defined for the code to be present.

Parameters:
pctxt Pointer to context structure.
value Boolean switch: TRUE turns tracing on, FALSE off.
Returns:
Prior setting of the diagnostic trace switch in the context.

Referenced by OSRTContext::setDiag().

OSBOOL rtxSetGlobalDiag ( OSBOOL  value  ) 

This function is used to turn diagnostic tracing on or off at run-time on a global basis. It is similar to rtxSetDiag except tracing is enabled within all contexts.

Parameters:
value Boolean switch: TRUE turns tracing on, FALSE off.
Returns:
Prior setting of the diagnostic trace switch in the context.
int rtxSetGlobalPrintStream ( rtxPrintCallback  myCallback,
void *  pStrmInfo 
)

This function is for setting the callback function for a PrintStream. This version of the function sets a callback at the global level.

Parameters:
myCallback Pointer to a callback print function.
pStrmInfo Pointer to user defined PrintInfo structure where users can store information required by the callback function across calls. Ex. An open File handle for callbak function which directs stream to a file.
Returns:
Completion status, 0 on success, negative value on failure
int rtxSetPrintStream ( OSCTXT pctxt,
rtxPrintCallback  myCallback,
void *  pStrmInfo 
)

This function is for setting the callback function for a PrintStream. Once a callback function is set, then all print and debug output ia sent to the defined callback function.

Parameters:
pctxt Pointer to a context in which callback print function will be set
myCallback Pointer to a callback print function.
pStrmInfo Pointer to user defined PrintInfo structure where users can store information required by the callback function across calls. Ex. An open File handle for callbak function which directs stream to a file.
Returns:
Completion status, 0 on success, negative value on failure

Variable Documentation

Global PrintStream